Made of best wood grades with the use of modern technology and equipment. Both facing and all internal plywood layers consist of wholesome veneer layers generated from first-class, strong, fine-grade wood.

Size of sheets -1525*1525 mm

Formaldehyde emission class: E1

• Sheet thickness — 4, 5, 6, 8, 9, 10, 12, 15, 18 — 30 mm
• Grade — I/II, II/II, II/III, III/III, II/IV, III/IV, IV/IV
• Species: birch, alder, pine, aspen.
• Type of treatment — grinding
• Raw materials:
  • circular hardwood
• Materials:
  • carbamide-formaldehyde resin CF-О; CF-ZH
  • technical ammonium chloride

Plywood GOST 3916.1-96 grade FSF 1220х2440 mm

Plywood is a board material glued out of three and more thin sheets of rotary cut veneer (thickness 2 mm; 1.5 mm) with mutually perpendicular direction of fibres in adjacent layers.

• Plywood thickness – 4 mm – 30 mm.
• Plywood is made of birch, alder.
• Depending on the appearance of external layers the plywood is subdivided to 5 grades: Е, I, II, III, IV.
• By water resistance of the glued connection the FSF plywood has increased water resistance.
• The FSF plywood is glued on the basis of phenol formaldehyde resin RPF-3014.
• By the degree of mechanical surface procession the plywood is subdivided to sanded and non-sanded ones.
• Emission class – Е1 (formaldehyde content per 100 g of absolutely dry plywood mass – by 8.0 mg, inclusive).
• Physical and mechanical features of plywood:

1. 1. Moisture content – 5-10 %.
   2. Shear strength on a glued layer after boiling in water:
      • during 1 hour – at least 1.5 MPa (for birch), 1.2 MPa (for alder);
      • during 6 hours – at least 1.2 МPа (for birch), 1.0 МPа (for alder).

• Field of application: for the internal and external use, in construction.